FULL AUTOMATIC SERVO DYNAMIC VOLTAGE REGULATOR 3 kVA -150kVA
FULL AUTOMATIC SERVO DYNAMIC
VOLTAGE REGULATOR
3 kVA -150kVA
VOLTAGE REGULATOR
3 kVA -150kVA
GÜVENİŞ Voltage
regulators are the machines that provide the constant voltage that you need by
correcting the falling and rising of the mains voltage in the internal
structure.
Our
DVR-M3 voltage regulators operate fully automatically for voltage regulation
without any user intervention.
Once
the regulators are switched on, your mains voltage is continuously measured and
the necessary up / down operations are performed automatically, giving your
system the constant voltage required for a healthy operation.
Servo
regulators consist of variac,
servo motor which controls variac,
electronic multimeter card
which controls this motor and booster transformer.
http://en.guvenisregulator.com.tr/u36-dvr-m3-serie-voltage-regulators
http://en.guvenisregulator.com.tr/u36-dvr-m3-serie-voltage-regulators
The
start torque can quickly correct even very small voltage changes thanks to the
high DC servo motor and the control system that can respond quickly to voltage
changes.
When
the regulation is completed, the servo motor is de-energized with the aid of
the electronic braking circuit. It has high efficiency.
Pollution,
parasitic, etc. at output voltage. do not corrupt.
You
can safely use any area with regular electricity needs without any problems.
The
DVR-M3 Regulator provides the following:
•Protection
of the user from negative voltages.
•Protection
of the user and the device from excessive current.
•Undisturbed
pure sinus voltage regulation.
•Long-term
overload protection and short-term protection.
•AC
voltage balancing with extremely high accuracy.
•Run
smoothly on all loads from 0% to 100%.
•Manual
transfer to bypass regime without regulating.
•Display
all values against the probabilities in the bypass regime.
•Record
mains input voltage limits and load current values.
•Static,
not gradual, dynamically correct output voltage too quickly without user
notice.
•When
protections are activated, record the number of protection trips and the reason
for each parameter separately.
•Generation
as standard is ± 0.4% (379.87V - 382.6V) stable when the input voltage is
within the range of 112.6V ..... 537V.


Comments
Post a Comment